MAXIMA Heavy Duty Platform Lift

MAXIMA Heavy Duty Platform Lift adopts unique hydraulic vertical lifting system and advanced high-precision balancing control device, to ensure perfect synchronization of the hydraulic cylinders and ultimately ensure the smooth up and down of lifts. MAXIMA Heavy Duty Platform Lift is designed for the assembly, repair, maintenance, oil-change, washing and other services of various commercial vehicles, such as urban public traffic vehicles, passenger coaches and heavy duty trucks etc.

Features

Unique Synchronization System:
It ensures smooth up and down of the lift even when the two lifting platforms are unevenly loaded.
Human Engineering:
Two lifting platforms function as the carrying agency and each lifting platform is equipped with two cylinders, one at each end. The lift also includes an independent electrical control system, a hydraulic power unit as well as an emergency descent device in case of power failure.
Unique structure:
The Y-type lifting arm greatly enhances bearing rigidity of the platform and simplifies overall structure of the lift. Furthermore, the Y-type spares more repair space under the platform, thus ensuring free passage of servicing equipments underneath.
High Cost-effectiveness:
The electronic and hydraulic control systems share one movable control box, which greatly compacts structural allocation and facilitates daily operation. The lift itself is easy to assemble and disassemble, and can be re-installed easily during factory relocation.
Safety Assurance:
The lift has double safety guarantee under load status, i.e. hydraulic support and mechanical lock; it is also designed with limit switch, so that it can stop in no time when the ultimate position is reached. In case of any unexpected power failure, the lift can be descended simply by turning the manual lower knob. In addition, the lift is also equipped with overload over-flow protection device.

Technical Parameters

MAXIMA Heavy Duty Platform Lift is designed and manufactured in strict accordance with European Standard EN1493, technical parameters are as follows: Product specifications may change without notice.
Ground requirement: compressive strength≥15MPa; gradient ≤1:200; levelness differences ≤10mm; make sure the equipment is away from combustible or explosive materials during both indoor and outdoor use.

Parameters/ModelMLDJ250
Rated Lifting Capacity 25000Kg
Maximum Lifting Height 1750mm
Equipment Minimum Height 350mm
Overall Length & Width after Installation 12400mm*2680mm
Width of Single Platform 750mm
Time of Full Rise ≤120 sec
Voltage(multiple options) 220v, 3phase /380v, 3phase /400v, 3phase
Motor Power 7.5Kw
Maximum Hydraulic Pressure 18Mpa
Product specifications may change without notice.

 

CONTACT US

 

Call:

1-855-269-4617

 

Address:

MIT AUTOMOBILE

1151 WEST 5TH STREET

AZUSA, CA 91702